Saltfire ST Range Stove Glass Replacement – All Models & Sizes – with Glass Seal (No Glue)

Please check your stove model and glass dimensions before ordering

Select the correct Saltfire ST model and glass size from the dropdown menu. Each option includes an 8mm soft round glass rope seal suitable for trimming to fit the selected panel.

Every panel is precision cut from genuine SCHOTT ROBAX heat-resistant glass-ceramic designed for high-temperature stove and fireplace applications.

This glass is plain (unbranded)

Available sizes:

ST1 – 300 × 285mm
ST1 MK2 – 298 × 203mm
ST1 Vision – 302 × 285mm
ST2 – 340 × 270mm
ST3 – 357 × 290mm
ST4 – 355 × 345mm
ST-X4 – 254 × 251mm
ST-X5 – 332 × 315mm
ST-X8 – 362 × 359mm
ST-X Wide – 460 × 300mm

Glass Seal Included

An 8mm soft round glass rope seal is supplied with every panel. No glue is supplied or normally required, as the pressure of the fitted glass should hold the seal securely in place.

Trim the seal neatly with scissors and join the two ends with a butt joint without overlapping them. End sealing tape can be applied to help prevent fraying.

Why Buy From Stove Spare Glass?

• Genuine SCHOTT ROBAX heat-resistant glass-ceramic
• 8mm soft round glass rope seal included
• Precision cut and edge finished
• Carefully packaged for transit

Before Ordering

Please compare the stated dimensions with your existing stove glass before ordering. Glass sizes can vary between similar models, production years or door versions.

If you are unsure which glass you require, contact us with your stove make, model, measurements and a photograph or outline of the old panel.

Fitting Advice

Remove the old glass and seal, clean the supporting surfaces and fit the supplied rope seal around the replacement panel.

The retaining clips should hold the glass securely but must not be overtightened.