Your Cart is Empty
Stove glass fitting can be arranged in store - drop off & collection service for stove doors.
Select the correct Mi-Fires model from the dropdown menu. Each option includes the replacement glass and an 8mm × 3mm self-adhesive high-temperature glass seal.
Every panel is precision cut from genuine SCHOTT ROBAX heat-resistant glass-ceramic designed for high-temperature stove applications. The glass is unbranded and features no logo.
Available sizes:
Coniston Large – 425 × 360mm
Coniston – 370 × 290mm
Derwent Multi Fuel – 347 × 275mm
Firepod models – 318 × 295mm
Flickrflame Large / Grisedale / Large Firecracker – 402 × 402mm
Tinderbox Tall & Large Woodburner – 402 × 402mm
Chatsworth Large / Washington Large – 405 × 363mm
Tinderbox Small Multi Fuel – 320 × 273mm
Tinderbox Medium Multi Fuel – 359 × 323mm
Tinderbox Large Multi Fuel – 393 × 359mm
Flickrflame Medium / Tinderbox Medium Woodburner / Skiddaw / Firecracker Medium – 360 × 320mm
Chatsworth Medium / Washington Medium – 325 × 320mm
Flickrflame Small / Tinderbox Small Woodburner / Loughrigg Small – 358 × 325mm
An 8mm × 3mm self-adhesive glass seal is supplied with every panel. Peel away the backing and apply evenly around the perimeter of the glass.
Trim neatly with scissors and join the ends with a butt joint without overlapping them.
Please compare the stated dimensions with your existing stove glass before ordering.
If you are unsure which glass you require, contact us with your stove model and measurements.
Remove the old glass and seal and clean the supporting surfaces thoroughly. Apply the supplied seal evenly before fitting the replacement panel.
Refit the retaining clips evenly. Clips or screws should only be tightened hand tight and must not be overtightened, as excessive pressure can damage the glass.
