Franco Belge Replacement Stove Glass with Glass Seal

Please check your stove model and glass dimensions before ordering

Select the correct Franco Belge stove model from the dropdown menu. Each option includes the replacement glass and a 6mm self-adhesive round rope glass seal unless otherwise stated.

Every panel is precision cut from genuine SCHOTT ROBAX 4mm heat-resistant glass-ceramic designed for high-temperature stove applications. The glass is unbranded and features no logo.

Available sizes:

Savoy Mark 1 – Arched – 378 × 292mm
Savoy Mark 2 Elegance – 402 × 322mm
Belfort – Arched – 267 × 205mm
Montfort MK1 – Arched – 333 × 215mm
Montfort MK2 – 333 × 270mm
Monaco – 425 × 253mm
Ardeche / Limousin – Arched – 439 × 272mm
Earlswood – 409 × 321mm
Heritage N25 – 325 × 118mm
Jurassien – 577 × 317mm
Monte Carlo Small – 240 × 330mm
Monte Carlo – 540 × 330mm
Lorraine MK1 Single Door – 375 × 190mm
Normandy – 500 × 190mm
Parissien – 220 × 155mm

Glass Seal Included

A 6mm self-adhesive round rope seal is supplied with each panel unless requested otherwise.

Apply the seal evenly around the glass seating area and trim neatly to length.

Before Ordering

Please compare the stated dimensions and shape with your existing stove glass before ordering, as some Franco Belge models were produced in different versions.

If you are unsure which glass you require, contact us with your stove model, measurements and a photograph or outline of the existing panel.

Fitting Advice

Remove the old glass and seal and clean the glass recess thoroughly. Fit the supplied seal evenly before installing the replacement panel.

Refit the retaining clips gradually and evenly. Clips or screws should only be tightened hand tight and must not be overtightened, as excessive pressure can damage the glass.

This is a compatible replacement precision cut by Stove Spare Glass Ltd and is not an original Franco Belge-branded spare part.