Charnwood Aire Replacement Stove Glass with Seal

Please check your stove model and glass dimensions before ordering

Select the correct Charnwood Aire model from the dropdown menu. Each option includes the correct replacement glass and a model-specific self-adhesive high-temperature glass seal.

Every panel is precision cut from genuine SCHOTT ROBAX 4mm heat-resistant glass-ceramic designed for high-temperature stove applications. The glass is unbranded and features no logo.

Available sizes:

Aire 3 / Aire 300 Intelligent – 280 × 275mm
Aire 5 / Aire 500 Intelligent – 375 × 345mm
Aire 7 / Aire 700 Intelligent – 437 × 347mm

Low Stand and Store Stand versions use the same glass for their corresponding model.

Glass Seal Included

A self-adhesive high-temperature glass seal is supplied with every panel.

The seal cushions the glass against the metal door frame and helps distribute pressure from the retainers. This is the thin flat seal used when fitting the stove glass, not the larger round door rope.

Why Buy From Stove Spare Glass?

• Genuine SCHOTT ROBAX 4mm glass-ceramic
• Model-specific self-adhesive glass seal included
• Precision cut and edge finished
• Carefully packaged for transit

Before Ordering

Please compare the stated dimensions with your existing glass and select the correct stove model before ordering.

If you are unsure which glass you require, contact us with your stove model, measurements and a photograph of the stove door.

Fitting Advice

Remove the old glass and seal and clean the glass recess thoroughly. Apply the supplied seal evenly so the glass does not sit directly against the metal door frame.

Refit the glass retainers gradually and evenly. Clips or screws should only be tightened hand tight and must not be overtightened, as excessive or uneven pressure can damage the glass.

This is a compatible replacement precision cut by Stove Spare Glass Ltd and is not an original Charnwood-branded spare part.